I have finally completed my MAME cabinet after several months of hard word (tbh, and a lot of waiting). So, here is the completed cabinet, and some resources to help you build your own.
The final piece to the puzzle was the motherboard. While installing some new LEDs to the coin door, I managed to burn out the motherboard audio. Luckily, I have a 1-year warranty; unluckily, it was two days after the 30-day return window for Newegg. I contacted Asus for a replacement, they told me Newegg would handle it. It took about a month to get in touch with Newegg who told me Asus would handle it. Asus was much faster responding, and I finally got my replacement installed and working.
Check out the resources to build your own MAME cabinet
The other day I received my control panel from Game On Grafix, and I got around to installing it which just about completes my MAME cabinet. I also picked up some joystick surrounds.
First, I had to remove the buttons and joysticks from the panel. This, and replacing them, is probably the worst part. (I really need to get some better cable management) After I got all the buttons off and removed the panel from the rest of the cabinet I sanded it down a bit to smooth out the hole filling I did prior. Then, I cleaned it up a bit so I didn’t have a bunch of dirt and hair stuck under the graphic.
Read about how the graphic was applied
This is just a quick update. A few days ago I received my marquee from Game on Grafix and installed it. My marquee installation was pretty easy because I already had plexiglass since it is a conversion cabinet. All I had to do was trim the marquee a bit off the sides and I taped it to the back of the plexiglass. Then, it was just a matter of sliding into place and replacing a few screws.
Check out the status of the remaining parts
Since I am converting an arcade cabinet for MAME use instead of building my own I had the issue of having old button holes. I tried to use the holes for my new buttons, but I only was able to reuse 2 of them. What to do with the other 4 buttons? Fill them with putty of course.
Wood putty is simple enough to work with, just plop some in the hole and smooth out with a putty knife. When working with button holes, a.) it takes a long time to dry, and b.) it’s good to apply putty in 2 rounds. The first round I did not wait long enough for the putty to dry and kinda screwed it up.
Today I decided to get rid of the old Beach Head 2000 graphic and clean up the panel a bit to prepare for my new graphic. It will still be a while before I get the new graphic, but I was tired of the old one. Before I tore the adhesive up, I applied a new layer of putty to clean up the holes a bit.
Read more about the clean up process